Kimberley King Storage Bed Marri Timber

Snooze authorised and exclusive product. 

The Kimberley Marri Timber King Bed is a perfect blend of elegance and functionality, making it an ideal addition to any bedroom. Crafted with meticulous attention to detail, it features a gas-lift storage frame, offering ample under-bed storage, along with two spacious storage drawers, each equipped with double metal full-length runners for smooth and reliable operation. The top drawer is lined with soft felt, providing a luxurious touch while protecting your valuables. Recessed cutout handles offer a sleek, modern aesthetic, while the curved frame enhances its sophisticated design. Additionally, two integrated USB/USBC charging sockets add a contemporary convenience, making this bed both a practical and stylish choice for your bedroom.

Dimensions:

• Height: 1150mm
• Width: 1965mm
• Depth: 2205mm
• Internal height of floor board to underside of the slats is approx 23cm (This does vary towards the HB where there is a support bar on the underside of the gas lift system. 
• Metal Plinth: H50mm
• Internal Drawer (x2): H144 x W627 x D518mm
• Floorboards (x3) W1839 x D695mm
• Internal width: 1839mm
• Drawer Front: H236mm x W767mm

Key points:

• Frame - Solid Marri Timber
• Side rails, drawer fronts, tops and sides - 5mm Marri Timber Veneer. 
• Headboard/Footboard Frame - Solid Marri Timber
• Headboard Front - 5mm Marri Timber Veneer
• Metal Plinth
• 2 x USB/USBC sockets (For Apple Products, must use official Apple cables to guarantee correct working connection) These are located on each side rail approximately 6 inches from the headboard end. 
• Gas-lift storage
• Felt lined floorboard compartment
• 2 x Storage Drawers - felt lined
• The footboard is supplied with the drawers fully assembled in one piece, making for a much easier assembly. 
• 2 x black strap handles 
• Bed is supplied in 5 boxes to distribute weight for carrying/assembly. 

ASSEMBLY INSTRUCTIONS

Why does the black gum feature look slightly different on some pieces?

Our Marri timber products are made using genuine Australian Marri, which is celebrated for its striking black gum vein patterns — a naturally occurring feature in the wood. However, Marri trees often produce shorter or narrower planks due to the high number of natural imperfections and voids.

To reduce unnecessary wastage and create a more sustainable product, smaller sections of timber are sometimes joined together. In doing so, we may add subtle, hand-finished black gum detail to visually blend the joins or to fill areas where natural gum veins were absent but expected for aesthetic consistency.

These faux gum accents are carefully applied by hand and follow the natural grain pattern of the timber, but because it’s a natural product and each piece is unique, some variation in appearance will occur. This technique ensures we maximise usable timber while maintaining the distinctive look customers love — and keeps our environmental footprint in check.

Design Registration Number: 202418901